Custom 3"inch Starter Pack

  • SKU: 3477




Christmas time is coming & we know how busy it gets when your out & about shopping in crowds of last minute Christmas shoppers. We have made this starter Pack ready for BNF. This custom pack has everything you need to get you started. We also would like you to know that the XJB 145 comes with a installed XT30 & comes without a receiver. We suggest that you install a Amass XT60U for the 3S battery that comes with this 3”inch PreMade Pack. You also will need to choose between 2 receivers either XM+ Receiver  or R-XSR Receiver. These 2 items do not come in this package & you need to purchase them separate. 

FXT Marvel Version II (CLICK ME)


Display Screen
Screen size: 5”
Screen type: TFT LCD Screen/long life
Resolution: 800*480 pixels
Aspect ratio: 16:9
Brightness: 600cd/m2
Video format: AUTO/NTSC/PAL
Audio: 6.5MHz
Input signal: AV/HDMI
HD IN (mini HDMI): Version 1.1 digital
Output signal: AV
Input voltage: 7-28v
Power consumption: 560mA@12v
Work status OSD display: YES
Recording format: AVI
Support TF card: Max 32GB micro SD card
Antenna connector: SMA
Dimension: 129mmx89mmx11mm

Gemfan Flash 3 blade Prop (CLICK ME)


Item name: 3052 3 blade propeller
Size: 3052, 3.0x5.2
Weight: 1.65g

EV-Peak C1-XR Charger (CLICK ME)


  • Power supply: 240 V AC / 11 -18 V DC
  • Charging power: 2x 100 Watt, 2x max. 10 A
  • Discharging power: 2x 12 Watt, 2x max. 5 A
  • Maximum number of cells: 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, lead-acid 1-10 cells (2V - 20V)
  • Balancing Power: max. 350W 
  • Size: 170 x 240 x 54 mm
  • Weight: 1.25 kg

CellMeter-7 Battery Capacity Checker (CLICK ME)


  • Compatible device: NiCd, NiMH, LiPo, LiFe, Li-ion
  • Use for LiPo LiFe Li-ion NiMH NiCd battery
  • Applies to check the batteries
  • 2.1" screen display
  • Battery Type: NiCd/NIMH,Li-Po,LiFe,Li-Ion
  • Cell number: NiCd/NIMH(4-7 Cells),Lithium type(2-7 Cells)
  • Display Mode: Battery cell voltages, total voltages, lowest cell voltage, Highest cell voltage gap between highest cell voltage and lowest cell voltage, Remaining battery capacity(%)

Runcam Lipo Guard Bag (CLICK ME)


Protect your home and valuables from a fire due to a Lipo battery failure with this Lipo-Guard bag from Runcam. Useful for storage, travel and during charging. The bag has an inner lining made from a woven fire retardant fiberglass material, which helps contain and greatly reduce any fires inside the bag.

We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended.

CNHL MiniStar 850mAh 11.1V 3S 70c Li-Po Battery


Brand: CNHL
Minimum Capacity: 850mAh
Configuration: 3S1P / 11.1V / 3 cells
Discharge Rate: 70C
Max Burst discharge Rate: 140C
Net Weight(±2g): 86g
Dimensions: 25mm x 30mm x 62mm
Connector Type: XT60
Balancer Connector Type: JST

FPV Racing Travel Backpack Made to Fit (Click Me)


- Reasonable capacity design to hold your Goggles and controller, batteries and other accessories.
- Polyester Wear-resistant fabric,comfortable and breathable
- with anti-vibration decompression, good plasticity, strong impact resistance, will protect your drone from scratches and shock.
- Breathable comfortable and heat dissipation honeycomb shoulder strap, ease pressure
- Has behind sack, can hold ipad/propeller/parking apron.
- With portable size and loop design for convenient carry, suitable for outdoor and tourism.

HGLRC XJB-145 145MM MICRO (Click Me)


Brand name: HGLRC
Item name: XJB-145MM FPV Racing Drone PNP
Model: VX145
Wheelbase: 145mm
Arm Plate Thickness: 3mm
Bottom Plate Thickness: 3mm
Side Plate Thickness: 1.5mm
Material: Carbon Fiber
Weight: 29g

1. Micro F4.V2 Flight Control Board ( D-Shot Version)


1. 28A 2-4S Blheli_S BB2 4 in 1 ESC

1. HGLRC XJB-TX20.V2 Mini FPV Transmitter

Package Includes:

Quad 3”inch , Goggles, Props, Charger EV-Peak , 

Battery Checker, Lipo Bag, Backpack, Battery, Radio