iRangeX IRX4 2.4GMOD WILL NOT RESTOCK!!!


Out of stock
  • Category: MODS +GOGGLE + RECEIVER + RADIO + CLOTHES + GATES
  • SKU: 33234

Price:AU$56.24


Out of stock

Description

                     WILL NOT RESTOCK!!!


Description:

The 4 in 1 wireless module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board,with MCU baseplate,can support a variety of remote control protocols by identifying the PPM signal output of the remote control,such as Walkera DEVO,Spektrum DSM2,Flysky,Frsky,WLToys,Hubsan,Hisky,etc. It can control up to several hundreds airplanes (or receivers).

 

This module can recognize the remote control PPM signal, then converted into the corresponding standard wireless remote control format,which means that in theory as long as the remote control is with analog functions, it can work.

his Multiprotocol TX Module is the STM32 board, all protocols are included. It is suitable for many brand's quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert  the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. As long as your transmitter can use the Open TX firmware,it is compatible with this module. You will get many new ways to control the RC models. 


Specification:

Brand Name: iRangeX

Item Name: IRX4

Band: 2.4G

Weight: About 40g

Firmware: STM32

Dimension: About 49x22x65mm

Antenna Length: About 108mm


Compatible Transmitter:

Frsky: All the frsky transmitter

Futaba: Futaba S-FHSS transmitter

Flysky: TH9X (Note: The plastic base of the pins on the transmitter needs to be removed to fit this module.)

Turnigy: 9XR,9XR Pro

Others: Other transmitter that can use the Open TX firmware.


Compatible RC Aircrafts:

Supported Brand :Cheerson,Syma,Wltoys , Eachine E010(Most of these brand's quadcopters, helicopters and airplanes are compatible but not every model.).


Features:

- Upgraded STM32 board,all protocols are included.

- For OrangeTX, all CYRF6936 based protocols are included.

- Suitable for many brand's quadcopters,helicopters and airplanes .

-  Multiprotocol TX module,as long as your transmitter can use the Open TX firmware,then it is compatible with module.

- Multiprotocol hex/bin files attached have been compiled with the source files dated of 19/12/2016 using the default settings AETR, telemetry enabled, serial mode enabled and ppm mode enabled using default table. INV versions have inverted telemetry set which is a must for OpenTX while the others are compatible with er9x/ersky9x.

- For Atmega328 boards, some RF modules (and associated protocols) have been included in each hex to fit in the Atmega328. For example Multiprotocol_V1.1.5_A7105-CC2500-CYRF6936.hex means that protocols depending on NRF24L01 protocols are excluded.

his Multiprotocol TX Module is the STM32 board, all protocols are included. It is suitable for many brand's quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert  the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. As long as your transmitter can use the Open TX firmware,it is compatible with this module. You will get many new ways to control the RC models. 


Specification:

Brand Name: iRangeX

Item Name: IRX4

Band: 2.4G

Weight: About 40g

Firmware: STM32

Dimension: About 49x22x65mm

Antenna Length: About 108mm


Compatible Transmitter:

Frsky: All the frsky transmitter

Futaba: Futaba S-FHSS transmitter

Flysky: TH9X (Note: The plastic base of the pins on the transmitter needs to be removed to fit this module.)

Turnigy: 9XR,9XR Pro

Others: Other transmitter that can use the Open TX firmware.


Compatible RC Aircrafts:

Supported Brand :Cheerson,Syma,Wltoys , Eachine E010(Most of these brand's quadcopters, helicopters and airplanes are compatible but not every model.).


Features:

- Upgraded STM32 board,all protocols are included.

- For OrangeTX, all CYRF6936 based protocols are included.

- Suitable for many brand's quadcopters,helicopters and airplanes .

-  Multiprotocol TX module,as long as your transmitter can use the Open TX firmware,then it is compatible with module.

- Multiprotocol hex/bin files attached have been compiled with the source files dated of 19/12/2016 using the default settings AETR, telemetry enabled, serial mode enabled and ppm mode enabled using default table. INV versions have inverted telemetry set which is a must for OpenTX while the others are compatible with er9x/ersky9x.

- For Atmega328 boards, some RF modules (and associated protocols) have been included in each hex to fit in the Atmega328. For example Multiprotocol_V1.1.5_A7105-CC2500-CYRF6936.hex means that protocols depending on NRF24L01 protocols are excluded.

Protocols & Models Table:

iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol STM32 TX Module With Case
iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol STM32 TX Module With Case
iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol STM32 TX Module With Case
iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol STM32 TX Module With Case
iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol STM32 TX Module With Case