Xhover R5LX

  • SKU: 6473




The R5LX features a forward sweep design that is preferred by our top racing FPV pilots. The forward sweep design grants smoother flying and sharper turns. We have tested many different versions of this design and we found this to be the best balanced forward sweep design. Our team pilots love this frame and we are positive you will too!.

This is a simple elegant quad copter that has been designed to be painless to work on and repair. It is manufactured out of high quality 3K twill carbon fiber. The Xhover R5LX swings a max prop size of 5". The R5LX features a press nut system, allowing effortless removal of arms and uncomplicated repairs. In addition, the R5LX consist of 2 M3 screws which permits less of a hassle when removing the arms. Fortunately, this quad copter does not require any other tools. Its unique PDB/FC mounting design allows the convenience of removing all the arms and bottom plate without removing the PDB/FC from the quad copter entirely. It’s a quad copter you will enjoy working on.

Overview features

  • Race ready
  • Durable
  • HD Camera ready (GoPro)
  • Light weight
  • 3K Twill Carbon Fiber
  • Easy to remove arms using 2 screws
  • Minimal hardware and parts
  • High Quality hardware
  • Easy Grip Standoffs
  • Easy repairs
  • Plenty of space for components
  • Durable and light
  • Custom PDB with 5v and 12v output


  • Airframe: 82g with all hardware and PDBB

AUW: 240g Including all electronics(Not including GoPro or Battery)


  • 1xTop Plate
  • 1x Main Plate
  • 1x Bottom plate
  • 2x Camera mounts
  • 4x Arms for R5LX
  • 8x 10mm Button Head Screws
  • 4x 35mm Standoffs
  • 4x 8mm Button Head Screws for press nuts
  • 1xPDB/FC mounting Hardware
  • 1xPDB Board 5v/12v
  • 1x Battery strap



1.Amazing Frame!

This thing is amazing! Simple, solid, and durable. Very well balanced and flies great right out of the box. If I had to pick something to complain about, it would only be that its a little difficult to get a GoPro session mounted. A strap and some foam took care of that problem though!
This is definitely my go to quad now. Great job XHove

2.great frame

frame has enough room to mount everything you need. I have a tramp vtx spektrum quad rx and flip23 f4 board on it. gopro fits good with no problems. buy extra arms! i did break an arm and damage a motor from a gate clip on grass. be careful if you have 5051's. your vtx antenna can get damaged if it gets to low because of the raised props.