Speed Addict - Catalyst MW 210-R V2
Description
Note: This kit just includes the frame - no motors or electronics included.
The Speed Addict 210-R (V2) is the successor to the original design that brought to the market back in 2015. The original 210-R quickly become one of the most popular racing and freestyle frames in the industry. Catalyst did not let the popularity of the V1 throttle their desire for perfection. The new 'V2' is the result of customer feedback, team pilot testing/input, and additional experience gained from the development of other designs such as the SuperLight line of frames and The Stigg. The goal of this new design is the ultimate uber delicious freestyle machine. Much Uber. Much delicious. Many of the same design principles that contribute to great flight characteristics for a racing specific drone also translate over to freestyle. Catalyst Machineworks was the first in the industry to use centralized battery placement and a "low profile" top deck. Our new V2 continues with that same design philosophy
- Place as much mass as possible close to the axes of roll and pitch rotation.
- Keep AUW "all up weight" low as possible while allowing for high power output. Dry frame weight is just over 100 grams.
- Place the center of gravity in the middle of the craft and sitting ON the same plane as the props.
Difference between V1 and V2
- Frame price is reduced
- Overall crash durability has increased
- Carbon fiber finish changed from gloss to matte
- Carbon fiber durability increased. We are using a superior material (less brittle)
- Fastener color changed from blue to black
- The lower PDB bay has been removed
- Overall weight has decreased. The V2 is a 4mm frame that weighs less than the V1 3mm option
- Max camera angle has been increased to 70 degrees
- Camera cage uses same cam side plates as the SuperLight frames. This allows either the standard HS1177 or Runcam style cameras to fit in the same mount
- Mounting slots were added to the base plate inside the camera cage. This means nearly any FPV camera can be used in the 210-R (V2) by using the camera's included mounting hardware
- The FPV antenna SMA mounting design was updated to drastically increase crash toughness
- RX antenna mount design was improved
- Lipo velcro strap slots were removed in favor of a more efficient design
- Flight controller mounting location was updated to allow for large footprint "All-In-Ones" to be used
***Please note motors/electronics are NOT included with this frame. Electronics are sold separately***
Features
- Dry frame weight is 102 grams
- Ideal center of gravity location
- Highly centralized mass concentration
- Unibody "X" frame configuration
- Symmetric weight distribution front-rear and side-side
- Super low top fuselage deck
- Durable robust design that is highly resilient to crashes
- Highly functional freestyle frame
- 210mm frame size optimized for 22xx motors paired with 5" props
- High-quality twill weave 3K matte carbon fiber construction
- High-quality black anodized aluminum frame standoffs
- All aircraft grade 7075 black aluminum fasteners
- RX antenna mount included
- XT-60 passthrough grommet
- Ideal FPV antenna SMA mounting solution
- Extreme FPV camera angle possible from 25 to 70 degrees
- Almost any FPV camera will fit
- Mobius/Runcam Mount Option
- Xiaomi Yi Mount Option
Specifications
- 100g bare frame weight (fully dressed)
- Runcam Split fits the frame! See details here
- Frame size is 210mm - prop to prop diagonally
- Supported lipo sizes: 1000mah - 1800 mah
- Supported lipo voltage: 4s - 6s
- Max prop size: 5"
- Fastener Color: Black
- Standoff Color: Black
- Carbon Fiber Type: Twill weave 3K matte
- Main frame plate thickness: 4mm
- Top deck plate thickness: 1.5mm
- Camera cage top plate thickness: 2.5mm
- Supported motors: 22xx, 23xx, etc
- Motor pad mounting info: M3 screw with 16mm / 19mm circle
Includes
- 1x Bottom Plate
- 1x Top Plate
- Hardware kit
- 1x Lipo Strap
- 3D Printed Antenna Mount
- 3D Printed Camera Mount
