FlightClub Tokio X


  • Category: FRAMES
  • SKU: 7783

Price:AU$125.75


BUY NOW!

Description

After months and months of designing, prototyping and currently testing, I'm proud to present to you our first frame, the FlightClub Tokio X. (Formerly known as the "FX210").


Features

  • Butter Mount frame
  • Chamfered outer edges – eliminates sharp edges to cut velcro straps or wires. Makes the arms less prone to take a hit and fray. Looks damn sexy.
  • Completely flat bottom. Countersunk holes and butter mount makes the bottom completely flat. No more protruding screw heads to tear apart batteries.
  • Hypotense Cut – using 0/90 carbon fiber, the models are rotated 45 degree on the carbon fiber sheet so the carbon fibers run down the length of the arms. 0/90 Carbon fiber lays sheets of carbon fiber in a way the fibers lay in a tic tac toe pattern. If the frames aren’t rotated 45 degrees, the fibers are cut. This leaves only the resin and bits of carbon fiber down the arms. Rotating the model 45 degrees leaves the carbon fibers intact inside the resin. I tried Quasi-isotropic carbon fiber also. Quasi-isotropic is rotating each layer of the carbon fiber sheets 45 degree in the manufacturing process. This way the models don’t need to be rotated 45 degrees before cutting. Sounds nice but in this application where we need the strongest arms possible, 0/90 is better. Say if you have 8 layers in a carbon fiber sheet. On the 0/90 you have 8 layers of fibers going down the arm. The Quasi-isotropic only has 4 layers of fibers going down the arm

Includes

  • 1x Carbon Fiber Frame
  • 1x Rubberized Canopy Mount
  • 1x Hardware Pack (Screws + Standoffs + Nuts)
  • 1x Battery Strap
  • Canopy Black