The best selling Micro Swift 2 just got better. The Runcam Micro Swift 3 now comes with a full-size lens and built-in Runcam control adapter. Control your FPV camera remotely with the built-in UART camera control technology and never use a menu cable again.
Runcam has replaced the GND and OSD pins on the camera with TX and RX pins allowing you to wire your camera directly to your flight controller for camera control. This allows you to setup your camera without the need for an additional resistor or capacitor.
|Model||Micro Swift 3|
|Image Sensor||1/3" SONY Super HAD II CCD|
|Lens||2.1mm (M12) FOV165°|
|Signal System||PAL / NTSC|
|One Key Scene||Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight|
|S/N Ratio||>60dB (AGC OFF)|
|Electronic Shutter Speed||PAL: 1/50~100,000; NTSC: 1/60~100,000|
|Auto Gain Control (AGC)||Yes|
|Remote Control||Flight Controllers : BetaFlight 3.3 / ButterFlight 3.4 / Cleanflight 2.2|
|Current||60mA@12V / 120mA@5V|